Attività

This kind of conveyor belt is used to install hopper, which is the traction part of bucket elevator and can lift and transport materials. According to the core structure of the belt is divided into fabric core and wire rope core. According to the wear and load of the material is divided into strong wear (D type), moderate wear (L type) and heat resistant transmission of high temperature materials (T type). Tape marking example 1 (fabric) : NN100 800*6(4.5T脳3.0) 100 indicates that the bucket lifting belt strength specification is 600N/mm, the thickness of the upper cover layer is 4.5mm and has a reinforcing layer, the thickness of the lower cover layer is 3mm, the bandwidth is 800mm, and the core material is nylon canvas for a total of 6 times. Tape marking Example 2 (wire rope) : St1000 600*蠁4.0(5T脳5T) 200 The strength specification of the tape is 1000N/mm, the thickness of the upper and lower cover layers is 5mm, and both have reinforcement layers, the bandwidth is 600mm, and the diameter of the wire rope is 4.0mm. At present, this kind of products comply with HG/T 2577-1994 “Rubber lifting belt” chemical industry standard.
The strength specifications and width specifications of fabric core lifting belt and steel wire rope core lifting belt are consistent with those of fabric core conveyor belt and steel wire rope core conveyor belt for general purposes respectively. The performance of covering layer is divided into three types: general environmental conditions (L type), heat resistance is not more than 150鈩?(T3 type), heat resistance is 175鈩?(T4 type).
Application: Widely used in building materials, mining, chemical, light industry, machinery, electric power and food department.
Advantages: small footprint, small environmental pollution, large throughput, good adaptability to block materials
Lifting conveyor beltSpecial Shaped Conveyor Belt suppliers
website:http://www.sdlandbridges.com/rubber-conveyor-belt/special-shaped-conveyor-belt/